Manual Supercom 636 R+W rev. 010312
7
3.1.4 LED display
There’re four LEDs on the front of the device.
Link : (Blue)
Conditions
LED state
The modem is ON
ON
A Bluetooth communication port is opened.
Blinking
0.25s every 2s
The modem is OFF
OFF
Charge: (Red)
Conditions
LED state
Accumulators charged
OFF
Low power
Blinking 0.25s every 3s
** Near empty
1 blink
Charging
ON
** If the accumulators are near empty the device shuts down by itself.
Tx : (yellow)
Conditions
LED state
A byte is transmitted via radio
0.25s per byte
Rx : (yellow)
Conditions
LED state
A byte is received via radio
0.25s per byte
3.1.4.1
Switch ON sequence
By turning ON the Supercom 636, the following LEDs sequence is running:
If another sequence is running contact your local Sontex agent or the Sontex technical support.
(See last page of this document for contacts).
2 seconds
The blue LED stays ON