Page 2 of 5
WD-AMX
Date of Issue: 17/08/2012
Issue Number: 5.4
Supply Voltage:
WD-AMX-1
24Vac/dc
±10%
WD-AMX-2
230Vac @ 50Hz
Supply current
50mA max.
Output
12A @ 250Vac
LED Status indication for:
Error
condition
Input
sensitivity
Relay output mode
Learning
Mode
Response time
<1 sec. after exposure
Max. sensor cable length 200m (656ft) with leader cable
Alarm hysteresis
Dependent on sensitivity
Audible alarm output
[email protected] @ 10cm
Electrical
Terminals for 0.5-2.5² cable
Connections
Rising
cage
Ambient:
Temperature
0°C to 40°C (32 to 104°F)
RH
0-80%
non-condensing
Dimensions
72 x 64 x 55mm
(2.83 x 2.52 x 2.17”)
Weights:
WD-AMX-1
100g
(0.22lb)
WD-AMX-2
240g
(0.53lb)
Country of origin
UK
The products referred to in this data sheet meet the
requirements of EU 2004/108/EC and 2006/95/EC
WD-AMX-1
24Vac/dc water detection alarm module with
audible alarm and LED status indication
WD-AMX-2
230Vac water detection alarm module with
audible alarm and LED status indication
Warning!
When installed, the output relay contacts may carry
240Vac. Special care must be taken to isolate the switched
voltages prior to any work being undertaken.
Specification:
Part
Codes:
