Page 8 of 8
MW-U
Date of Issue: 12/03/2013
Issue Number: 5.3
Tel:
+44 (0) 1732 861200 -
E-mail:
Web:
www.sontay.com
© 2012 Sontay Limited. All rights reserved
Display Loops (continued)
Whilst every effort has been made to ensure the accuracy of this specification, Sontay cannot accept responsibility for damage, injury, loss or
expense from errors or omissions. In the interest of technical improvement, this specification may be altered without notice.
Level 1
1st monthly value heat energy
1st monthly value input 1
1st monthly value input 2
Sensor type & installation point
Pulse value
Basic configuration
Model number
Date battery end
Time
Datum
M-Bus address
Baud rate
Input display
Error status
Software version
Legend
Press the button briefly (S) to switch
through the display from top to
bottom. When you have reached the
last menu item the device
automatically jumps back to the menu
item at the top (loop).
Press the button for about 2 seconds
(L), wait for the door symbol to appear
(upper right corner of the display) and
then release the button. The menu is
then updated resp. switches to the
sub-menu.
Hold down the button (H) until the
device switches to another level or
switches back from the sub-menu.
