SONAPHONE
®
E
Operating Manual – Revision: 2.4 | 2020-11-17
Page 37 of 66
A Single test is edited or created in the following menu:
The character to be edited is selected by pressing the rotary knob and set
by turning it. To edit the last character again press the Button “F1”. The
character sets (
ABC
abc
012
:;<
) are switched over by
pressing the "F2" key. Press “F3” to store both the tester’s name and the
test site for the corresponding Single test.
The test values are stored in the test mode by pressing the rotary knob.
The following data is stored for each test:
-
Date / time
-
Type of probe
-
Test mode / mixer frequency
-
Ultrasonic test value
-
Temperature value
Archiving the individual tests is only possible by using the PC software
SONAPHONE Communicator, available as an accessory tool.
Save
Test place
Tester
MOTOR
SONOTEC
1
012