Sonotec SONAPHONE BS30, Manual

Page: 17 / 18

Technical Data Sheet
V - IV - 1
Revision: 1.5 | 2020-09-14
Parabolic sensor BS30
The parabolic sensor is used for the accurate detection of
ultrasonic waves over distances of up to 35 m. The
following testing work can be carried out in combination
with the SONAPHONE:
•
Detection of leaks in compressed air,
gas and vacuum systems
•
Detection of electrical partial discharges and
insulation damage
•
Tightness testing of windows, doors, vehicles or
containers (in combination with the SONAPHONE T
ultrasound transmitter)
Testing can be easily stopped and started using the function key on the sensor handle. The target
laser can be switched on via a separate button. The target laser and a light spot target device allow
for the precise location of damage areas.
GENERAL SENSOR DATA
Design Sensor with parabolic reflector for the detection of airborne ultrasound signals
at distances of up to 35 m, target laser (class 2) and red/green dot sight
Operation
Via buttons on the sensor or on the device:
Start/stop testing │ Laser on/off (press and hold button)
Frequency range
20 … 100 kHz
Measurement resolution
1 dB
Power supply and
communication
Cable connection with the SONAPHONE (160 cm): LEMO connection
Dimensions (W x H x D) 270 x 440 x 390 mm (when assembled)
Reflector diameter 270 mm
Weight 750 g
Materials Sensor: Aluminum, polycarbonate, ABS
AMBIENT CONDITIONS
Operating temperature -10 °C … +65 °C
Storage temperature -20 °C … +65 °C
Protection type IP40