SonoSite V-UNIVERSAL STAND, User Manual

Page: 7 / 96

En
glish
De
utsch
Español
Fr
a
n
ça
is
It
a
lia
n
o
Po
rt
u
g
u
ê
s
V-Universal Stand User Guide 5
To attach the ultrasound system
1 (NanoMaxx only) Connect the NanoMaxx dock or power-only adapter to the system.
2 Attach the transducer holder to the system.
3 Place the back of the system onto the mounting plate.
The two pegs on the mounting plate pass through the transducer holder and, on the S Series
system, into the two large holes on the system.
4 Turn the screw in each of the four corners into the system until the system is secure. Tighten with
a Phillips screwdriver. See
Figure 3 .
Figure 2 Turn screws on transducer holder: S Series (on left) and NanoMaxx (on right)
Figure 3 Turn screws on mounting plate: S Series (on left) and NanoMaxx (on right)