SonoSite M-Turbo, Service Manual

Page: 34 / 58

30 Chapter 4: Replacement Procedures
Figure 4.21 Nest Frame Top Screws
3 Turn the system over.
4 Remove the 4 Socket Head Cap Screw as shown in Figure 4.21 . This releases the Nest Frame
and will allow the Main PCBA to be removed.
5 As you remove the nest frame assembly from the PCBA, tilt the PCBA and enclosure to
almost vertical to avoid spilling the Interposer Connectors from the assembly.
6 Lift on the edge of the Main PCBA closest to the system handle.
2.5mm Socket Head Cap
Screws (4x)