SSI-6000/SSI-5800/SSI-5500/SSI-5500BW
Digital Color Doppler Ultrasound System
11.3.9
Clip Plane
CLIP PLANE
Turn this function on to enable the clip plane. Clipping facilitates the visualization
of the structure covered by the surface.
To move the position of the clip plane:
1. Move the cursor over the volume display and press
UPDATE
or
ZOOM
.
2. Use the trackball to move the clip plane position.
Remark:
Note that in the step 1 above,
• press
UPDATE
and followed by the space bar to activate the rotation of the
volume display; or
• press
ZOOM
and followed by the space bar. Use the trackball to zoom in/out
the volume display.
11.3.10
Opacity Setting
OPACITY OFFSET
Use this function to adjust the opacity offset which enhances the display of the 3D
structure.
OPACITY SLOPE
This function fine tunes the opacity setting.
11.3.11
Multi-Slice
This function shows the surfaces slicing the 3D structure.
11.3.12
Color Map
COLOR MAP
Similar to the C Map function in the B mode, this function chooses the method for
mapping the amplitudes of echoes to the grayscale or color pixels.
11.3.13
Scan Method
SCAN METHOD
Adjust the Scan Method, which can be chosen from Linear Motion(
Lin
) and Sector
Motion (
Sec
), to the actual method used for acquiring the volume data.
11.3.14
Z Scale (For Scan Method =
Lin
)
Z SCALE
This function increases or decreases the volume display in the z direction.
P/N: 4701-0061-01B
11-6
