Sonoro SO-331, Operating Manual

Page: 73 / 336

© sonoro audio GmbH 2022 73
GB
3.4 Performing initial setup
When PRESTIGE is powered on for the first time, the “Language” (to be used
in the display) selection shows on the display. Afterwards, the Privacy policy
statement appears and needs to be accepted by pressing (
OK
) on remote control
or navigation knob. Then, the “Setup wizard” appears on the display. Follow the
instructions below to configure some initial settings.
1. When the “Setup Wizard” is displayed, press or on the remote control
(or rotate the navigation knob) to select “YES” and then press
OK
to start the
setup.
2. You are then prompted to select:
•
Time format (12 or 24-hour),
• Source of time & date auto update (Update from Radio, Internet or no update).
Depending on the selection you have made, follow the instructions on the
display to further set up date and time, time zone, daylight saving or wireless
network. Rotate the navigation knob on PRESTIGE or press the navigation
buttons on the remote control to make selections and then press
OK
to
confirm (see chapter “Using the menus”).
If update from Internet is selected, a Wi-Fi connection must be established.
When entering the key of your wireless network, rotate the navigation knob on
PRESTIGE or press the navigation buttons on the remote control to select a
character and then press
OK
to confirm. To delete the last entry, select [BKSP].
To cancel entering the key, select [CANCEL]. To confirm the entered key, select
[OK].