Sonoro PLATINUM SO-2000, Operating Manual

Page: 33 / 72

GB
© sonoro audio GmbH 2021 33
•
Remove the red ribbon from the drive belt.
• Rotate the turntable several times to make
sure that the drive belt is secure and rotating
smoothly.
4. Placing the mat
•
Place the mat of the platter on the platter.
• The mat has a top and a bottom. The side
with the ridged concentric circles should be
placed down.
Top
Bottom
5. Installing the counterweight
•
Place the counterweight over the end of
tonearm, and slowly turn it anti-clockwise
while gently pushing it.
6. Installing the headshell
• Insert the headshell on the end of tonearm.
•
Turn the lock nut in the clockwise direction to
secure the headshell.
7. Removing the stylus protective cover
•
Hold the stylus protective cover from its front
and back, and while pushing the latch on the
rear part.
• Slowly tile the cover downward.
8. Setting the tonearm balance
•
Set the anti-skating dial to zero.
Lock nut
Counterweight
Ribbon
Anti-skating dial