5
1.1. Accessories
Basic accessories:
•
Model 5014 external power supply (Mascot).
•
Instruction Manual.
•
Declaration of Conformity.
•
Warranty Card.
•
Certificate of Verification.
•
OP 60/2 microphone windscreen.
•
Carrying case.
•
1.8 m USB interface cable.
•
DSA-50 computer software for instrument remote operation (PC under MS Windows
98SE/ME/2000/XP required).
•
DSA Monitor computer software for data display, readout and analysis (PC under
MS Windows 98SE/ME/2000/XP required).
Additional accessories:
•
Built-in microphone heating system.
•
Watertight carrying case.
•
KA-50 sound calibrator.
•
CV-06 external supply source together with 8614 power supply (Mascot).
•
Weatherproof accessories set for microphone.
•
Microphone extension cable PD5Lx (x stands for cable length, max. 6 m).
•
Microphone extension cable PD7Lx (x stands for cable length, max. 6 m).
•
Supporting stand for microphone: SM2 (2 m height) and SM4 (4 m height).
•
Supporting stand for the instrument: SMR (1.5 m height).
1.2. Weatherproof accessories set for microphone
This set enables to convert WK-21 microphone into WK-21WP weatherproof microphone. It
consists of:
•
weatherproof version of microphone protecting grid, model SM,
•
rain cover, model OK,
•
windscreen with anti-bird spikes, model TOP,
•
microphone holder.
To assemble weatherproof microphone proceed as follows:
•
Fasten the part (2) of microphone holder to microphone extension cable PD7Lx and next
connect this cable to microphone-preamplifier assembly (1) (see Fig. 1.2).
•
Put part (3) of microphone holder on microphone-preamplifier assembly (1) and then
screw it to part (2) of microphone holder fastened earlier to extension cable (see Fig. 1.2).
•
Remove standard protecting grid (4) from WK-21 (see Fig. 1.3).
WARNING! During this and next action particular care should be observed as the
microphone diaphragm is exposed after protection grid removing and may be easily
damaged!
•
Screw SM weatherproof protecting grid (5) to the microphone (see Fig. 1.4).
•
Put OK rain cover (6) on the microphone (see Fig. 1.4).
•
Put TOP windscreen with anti-bird spikes (7) on the microphone assembled as above
(see Fig. 1.5) until the windscreen reaches microphone holder.
•
Fig. 1.6 shows completely assembled weatherproof microphone WK-21WP.