STEP 5
A. PLACE THE CHAIR LEGS UPSIDE DOWN ON A
FLAT, PROTECTED SURFACE.
B. ATTACH THE SHORT ARMS OF THE GLIDER (H) TO
OUTSIDE OF CHAIR LEGS (E & F) LINING UP THE
BOLT HOLES ON GLIDER (H) WITH CORRESPONDING
BOLT HOLES ON THE LEGS (E & F).
C. ATTACH USING BOLT (L) WITH WASHERS (N & M).
USE WASHER (M) BETWEEN SHORT GLIDER ARMS
(H) AND CHAIR LEGS (E & F). LOOSELY TIGHTEN
WITH ALLEN WRENCH (O)
ASSEMBLY INSTRUCTIONS (CONTINUED)
SONOMA CORONADO GLIDER ASSEMBLY INSTRUCTIONS
STEP 6
A. PLACE THE CHAIR SEAT AND BACK UPSIDE DOWN
ON A FLAT, PROTECTED SURFACE.
B. ATTACH LONG ARMS OF GLIDER (H) TO LEFT AND
RIGHT ARMS OF CHAIR BASE USING BOLT (L) AND
WASHERS (M & N). USE WASHER (M) BETWEEN
LONG GLIDER ARMS (H) AND CHAIR LEGS (E & F).
C.TIGHTEN ALL BOLTS WITH ALLEN WRENCH (O).
STEP 4
A. PLACE THE CHAIR LEGS ON A FLAT, PROTECTED
SURFACE.
B. ATTACH THE RIGHT LEGS (E) AND LEFT LEGS (F)
TO THE LEG SURPORTS (G) BY LINING UP THE BOLT
HOLES ON THE LEGS WITH CORRESPONDING BOLT
HOLES ON THE LEG SUPPORTS (G). ATTACH LEG
SUPPORTS USING SHORT BOLT (I) AND ALLEN
WRENCH (O). DO NOT TIGHTEN COMPLETELY.
Page 4/5
