STYLE #: 53SNR2001BAS
ASSEMBLY INSTRUCTIONS (CONTINUED)
**WE RECOMMEND THAT YOU PERIODICALLY TIGHTEN ALL CAM LOCKS AND WOOD SCREWS.
1. WIPE CLEAN WITH A SOFT, DRY CLOTH AS NEEDED.
2. DO NOT SIT, STAND OR CLIMB ON CONSOLE TABLE.
3. WEIGHT RESTRICTION: TOP: 200 LBS, SHELF: 50 LBS, DRAWER: 10 LBS.
4. INTENDED FOR INDOOR USE ONLY.
**FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION,
CALL: 1-866-942-5362 BETWEEN 8:30 A.M. AND 4:30 P.M., PST, MONDAY - FRIDAY.
EMAIL:
STEP 19
A. ROTATE THE ASSEMBLED FRAME UPRIGHT.
B. GLUE LARGE WOOD DOWELS (CC) INTO THE LARGE
HOLES OF ASSEMBLY FROM STEP 16.
C. ATTACH TOP (A) TO SIDE FRAMES (B & C), BACK
PANEL (D) AND PARTITION PANEL (H) OF ASSEMBLY
USING LARGE CAM LOCKS (R).
STEP 20
A. INSERT THE ASSEMBLED DRAWERS INTO FRAME TO
FINISH THE ASSEMBLY. SIMPLY PUSH THE BALL
BEARING CART ALL THE WAY TO THE END OF BOTH
SLIDES, THEN ALIGN THE SLIDE RUNNERS ON THE
DRAWER WITH THE SLIDE TRACKS ON THE UNIT.
PUSH DRAWER CAREFULLY INSIDE UNTIL IT STOPS.
NOTE
: IF THE DRAWER DOES NOT GO IN SMOOTHLY,
PLEASE TAKE IT OUT AND REPEAT THE STEP.
DRAWER INSTALLATION
DRAWER REMOVAL
FRONT
BALL BEARING CART
RELEASE LEVER
D
B
C
R
H
A
CC
CC
CC
R
R
R
A
B
C
L
M
L
M
R
Page 10/10
