manualshive.com logo in svg

Sonoff Basic, User Manual, Page: 2 / 8

Share
Download
Sonoff Basic User Manual Download Page 2

 

3. Add device

1. Power up the device after you complete the installation.

2. Press the button for 7 seconds until the green LED fast blinks. Due to this model
has used different firmware and module, the led has two blinking ways.

Open eWeLink app, click”+”, you’ll see the pairing icons. Please select the pairing
mode according to below instructions:

If the led blinks like this: 

 please select Quick Pairing Mode (TOUCH), tap Next.

If the led blinks  like this: 

a. If the device firmware is 

1.6.0 or higher

,  please select Quick Pairing Mode

(TOUCH). Otherwise, it will fail to add the device. Click Next.
b. If the firmware of above models is

 lower than 1.6.0

, please select 

Compatible

Pairing Mode (AP)

 icon, click Next. iOS users should go to Phone

Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password
12345678. Go back to eWeLink, click next.
3. It will auto-search and connect smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not
supported.

Summary of Contents for Basic









Reviews:

No comments