SLX SERIES
page 1
STATUTORY INFORMATION/ PRECAUTIONS
Congratulations on your purchase of the SLX Series professional speaker. It can be used for live sound
reinforcement, permanent installations and a variety of other applications.
IMPORTANT SAFETY INSTRUCTIONS
1. Do not place the unit on an unstable surface that may topple and cause the unit to fall, thereby causing
injury to the user or other people.
2. Do not place the unit outdoors where it may be exposed to strong sunlight, rain or moisture.
3. Do not place it near a water body or sprinkler.
4. Do not place the unit near heat radiating items like stoves, radiator etc.
5. Do not allow liquid or any chemical to spill on or into the product.
6. Do not open the unit or attempt to service it yourself. There is no user-serviceable part inside. Refer
servicing to qualified service personnel only.
MOUNTING PRECAUTIONS
Follow all safety precautions provided by the manufacturer
Take necessary precautions while working in harsh weather. For example, use extra weights to weigh down
the system, and provide more stability. Avoid using the speaker stands as points to tie banners as they may
make the speaker unstable.
Confirm if the load bearing capacity of the bracket or pole is sufficient to mount the speaker. Always ensure
you have adequate manpower to position and transport the speakers.
Verify that the stand/subwoofer are placed on level surface to prevent wobbling and accidents. If using
a tripod stand, please ensure that the stand legs are fully extended to provide maximum stability to the
speaker.
Never mount more than one speaker on the pole or stand
Before mounting the speakers, ensure that all stands and poles are mechanically ok
MOUNTING SUSPENSION INSTRUCTIONS
The SLX 1008, 1110, 1120 and 1150 speakers are equipped with suspension points on all sides enabling
them to be flown and angled in any desired direction/orientation. When flying the speakers, customers
should ensure that they follow the guidelines for hanging, established by the respective countries. It is highly
recommended that all flying hardware be thoroughly checked before the speakers are flown. Users should
ensure that the weight of the flown speakers are within the load bearing capacity of the suspension system.
The maximum load bearing capacity of the suspension system should never be exceeded as it is extremely
dangerous, and poses great risk. Please ensure that the rigging hardware complies with ASME B30.20.
MOUNTING
The speakers may be mounted on brackets fixed to a wall, or on stands. The details of mounting are shown
in the figures shown below. The SLX 1008/1010/1012/1120/1015/1150 models are equipped with pole-
mount sockets, for fixing to a pole. It can be found at the bottom of the unit. Using this socket, the speaker
may either be mounted on stands or on a pole-mount wall-bracket. The speakers may also be used as stage
monitor/wedges. The SLX 1008/1010/1012/1015 models can be wall mounted using brackets fixed to a
wall.
The exclamation mark within an equilateral triangle symbol is intended to alert the user
of presence of important operating instructions in the owner’s manual accompanying the
product.