Buff-n-Dry Riser - Installation Instructions
© SONNY’S The CarWash Factory
SonnysDirect.com
This document is confidential and proprietary to SONNY’S and cannot be used, disclosed or
Page 6 of 9
duplicated without prior written consent. Content, prices and availability subject to change without notice.
3.30.2020
6. With the clamp plates secure, remove the
12” bolts
and install the Buff-n-Dry brush assembly onto the
risers. Use the
12” bolts
along with the washers and nuts to tighten the brush assembly to the frame
and risers.
7. Use two sets of the provided
5.5” bolts
with washers and nuts to tighten the braces to the brush
assembly. The braces’ other ends should be flat against the vertical posts of the frame legs. Repeat
on the opposite side.
