TEMPO
™
SERIAL ATA
2-Port Serial ATA Card
Quick Start Guide for Tempo Serial ATA
You Should Have
The following items should be included in your product package:
• One Tempo Serial ATA 2-Port Serial ATA Card
• One Serial ATA data cable
• One legacy to Serial ATA power cable adapter
• Four screws (for mounting hard drives)
The following items may be required for installation:
• Medium Phillips screwdriver
• Drive mounting brackets/carriers or drive mounting sleds (sold
separately)
• One additional Serial ATA data cable (sold separately)
• One or more legacy (4-pin) power cable Y-adapters (sold
separately)
• One additional legacy to Serial ATA (4-pin to 15-pin) power cable
adapter (sold separately)
• One or more Ultra ATA to Serial ATA adapters (only used to support
parallel ATA drives, sold separately)
System Requirements
The Tempo Serial ATA requires the following in order to operate in your
system:
• One available PCI slot
• One or more hard drives (depending on confi guration)
• One or more available hard drive bays (depending on confi guration)
• Mac OS
®
8.6 through 9.2.x, Mac OS X Version 10.2.x or later
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]
Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350
©2003 Sonnet Technologies, Inc. Revised 2004. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc. Tempo Serial ATA includes technol-
ogy by FirmTek, LLC. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications
subject to change without notice. Printed in the USA. QS-TSATA-E-B-112304
Support Notes:
We recommend that you make a backup of important
information on your system’s current hard drive prior to installing new
hardware or software.
When handling computer products, you must take care to prevent components
from being damaged by static electricity. Before opening your computer or
removing parts from their packages, always ground yourself first by touching
a metal part of the computer, such as a port access cover, and work in an area
free of static electricity; avoid carpeted areas. Handle all electronic components
only by their edges, and avoid touching connector traces and component pins.
Also, avoid touching the logic board and any of its components.
