7
Installation Steps—Windows PCs
For
Windows
Windows 98 SE (continued)
7.
When the next Add New Hardware Wizard (NEC USB Open Host Controller)
window appears, click Next.
8.
When the next window appears, select “Search for best driver for your
device (Recommended),” and then click Next.
9.
When the next window appears, click Next.
10.
When the message stating “Windows has found an updated driver for
this device…,” click Next.
11.
When the message stating “Windows is now ready to install the best
driver…” appears, click Next.
12.
When the message stating “Windows has fi nished installing the software
that your new device requires,” appears, click Finish; the window will
close.
13.
When the next Add New Hardware Wizard (NEC USB Open Host Controller)
window appears, click Next. Note: This is correct; this driver is installed
two times (once for each USB port).
14.
When the next window appears, select “Search for best driver for your
device (Recommended),” and then click Next.
15.
When the next window appears, click Next.
16.
When the message stating “Windows has found an updated driver for
this device…,” click Next.
17.
When the message stating “Windows is now ready to install the best
driver…” appears, click Next.
18.
When the message stating “Windows has fi nished installing the software
that your new device requires,” appears, click Finish; the window will
close, and then New Hardware Found windows will appear.
19.
When the Add New Hardware Wizard (PCI OHCI Compliant IEEE 1394 Host
Controller) window appears, click Next.
20.
When the next window appears, select “Search for best driver for your
device (Recommended),” and then click Next.
21.
When the next window appears, click Next.
22.
When the message stating “Windows is now ready to install the best
driver…” appears, click Next.
23.
When the message stating “Windows has fi nished installing the software
that your new device requires,” appears, click Finish; the window will
close, and then New Hardware Found windows will appear.
24.
From the Start menu, select Shut Down…, and then select Restart from
the Shut Down Windows window to complete the driver installation.
