Bluetooth and Line In
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing POWER / SOURCE BUTTON.
2. Press the POWER / SOURCE button to switch to Bluetooth mode. BLUETOOTH MODE INDICATOR will blink slowly.
3. Press the PLAY / PAUSE / BLUETOOTH PAIR / SCAN RADIO BUTTON. The BLUETOOTH MODE INDICATOR will blink quickly.
4. Using the native controls on your Bluetooth device, select R-1428 in your Bluetooth setting to pair.
5. If your device requests a password, enter the default password 0000.
6. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
7. When successfully paired and connected, the Pairing indicator will be solid.
8. After initial pairing, the unit will stay paired unless manually by the user or erased due to reset of the device.
9. If your device should become unpaired or you find it is unable to connect, repeat the above steps or press the PLAY / PAUSE / BLUETOOTH
PAIR / SCAN RADIO BUTTON to start the pairing process again.
Playing Audio through Bluetooth
1. After successfully pairing to a device, use the native controls on the connected Bluetooth device to select track.
2. To play or pause the selected track, use the native controls on the connected Bluetooth device or the PLAY / PAUSE / BLUETOOTH PAIR /
SCAN RADIO BUTTON.
3. To skip forward or back on the selected track, use the native controls on the connected Bluetooth device or the SKIP / TUNE BUTTONS on the
unit.
4. Audio played through the connected Bluetooth device will now be heard through the speakers.
Using the Audio Input – Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to AUX IN JACK on the rear of the unit and the audio output on an audio device.
2. Press the POWER / SOURCE BUTTON to turn the unit on.
3. Press the POWER / SOURCE BUTTON to switch to Aux In mode.
4. Use the native controls on the connected device to play your audio through the unit.
USB CHARGE
1. Make sure the unit is plugged into the wall.
2. Using the appropriate USB charging cable (not included), connect one end to the device and the order to the USB port on the unit.
Refer to the user’s manual for your specific device for manufacturer’s required charging amperage as well as determining the appropriate cable
for your device before charging.
Note: This device uses a USB charging port with 1000mA maximum charging capacity, making it unsuitable for charging iPads.
3. The device will now charge.
Resetting the Unit
In very rare instances, such as an electrostatic discharge on a dry cold winter day, an erroneous display or prolonged abnormal behavior during
normal use, you should unplug it from the AC power source and then remove the backup batteries from the battery compartment at the rear of
the unit for at least one minute and it will reset to factory default setting.
Specifications
Power Output …………………………………… 2 watt RMS Mono
USB Charging ………………………….………… DC 5V, 1A
AC Power ……………………………….…………. AC120V – 240V 5V 1.5A ~ 50/60Hz
Battery Size (For Back Up Only) …….…… CR2032 x 1pc
Radio Frequency ………………………..……… FM: 87.5 – 108MHz
