4
SSD Installation Steps
8.
Using screws you removed previously, secure the
SSD(s) to the card
(Figure 4)
;
do not overtighten
the screws
. If you installed fewer than four SSDs,
reinstall remaining screws into the open holes.
9.
Set the heatsink on top of the SSDs, aligning the
screw holes in the heatsink with the corresponding
holes in the card
(Figure 5)
.
10.
Holding the heatsink firmly against the card, flip
the Sonnet M.2 4x4 PCIe Card over
(Figure 7)
.
11.
Secure the heatsink to the card with five of the
screws you removed previously
(Figure 7)
;
do not
overtighten the screws
.
Figure 4
Figure 5
Figure 6
