53
GB
5 Operating instructions
•
Putting into operation
1) Ensure that the unit is connected to the power socket.
2) Make sure the water tank is placed in proper position. (If the
full tank lamp lights up after plugging in the machine for the
first time, just pull out the water tank, then push it back into
the proper position.)
3) Press the power control to turn on the machine. Press "
" to select humidity setting.
4) If the humidity indoors is over the set humidity, the machine will start removing moisture.
After reaching the desired humidity, both the compressor and the fan go to standby and
are activated at the time when the room humidity exceeds the desired level of humidity.
5) When the humidity in the room is over the set humidity, the machine will start removing
moisture again.
•
When the „BUCKET FULL“ lamp is on
When the water tank is full, the indication lamp will light up, the dehumidifier will stop
operating. Remove the water in the tank, then place the water tank back into its proper
position and the machine will start operating again.
Remove the water in the water tank
with two hands.
