EN
38
05 - STORAGE AND MAINTENANCE
Storage
If possible, protect the device from dust and dirt. Direct sunlight can also cause discoloration of the
wood.
NOTE:
Any chemical that can attack the wood material will damage the hot tub and the
protective coating that is on the wood.
Maintenance
From time to time wash the bath with a sponge and
some liquid washing agents. Clean the stove from
the ash after every use. This can be easily done with
an ash shovel.
If there are integrated headrests in your hot tub
model, take them off from time to time and let them
get dry Wet headrests may burst because of low
temperatures. Therefore, it is advisable to dry the
headrests after every bathing in winter.
If the hot tub is used often, it is necessary to control water quality, keep the water clean and change it
in time. Agents for swimmina pool sanitation can also be used for cleaning and maintenance of a hot
tub. It is important to dose the washing agents strictly in accordance with the instructions. Water pH
level must always be regulated to avoid the damage of fiberglass. Appropriate pH level is Water must
be almost chlorine free. acceptable chlorine quantity is 0,3-1,0mg/L. Use only 20g chlorine tablets
for your hot tub(other tablets contain too much chlorine). Do not throw the tablets directly into the
water. Use special dispenser, which is appropriate for the size of your hot tub. To keep water clean for
a longer time, equip the hot tub with water filter. After using the hot tub with sea water, it is recom-
mended to rinse the tub with unsalted water. It is advisable to treat a hot tub from the outside with tar
oil or any other protective agent suitable for wood once a year.
Warranty
All products are checked from our company before the delivery. In case that there is a lack on your product, please
contact the vendor. Please bring your proof of purchase for guarantees. Please save the packaging materials of the
unit.
Disposal
Please remove the heater properly. You can bring the product to any specialist dealer fort he removal.
Technical changes
Technical changes in technique and design are possible.
06 - WARRANTY, CONFORMITY & DISPOSAL