Sonnenkonig 30301112, User Manual

Page: 43 / 48

43
EN
Installation wall
When fixing the heater to a wall, ensure hinges
are in the underside so that the lid hands down
in the open position.
Minimum required distances:
500 mm from the side wall
500 mm from the ceiling
Installation height above 1.8 m
Please remove the four M6*10 Screws on the
heater, and use them for the step 1.
Step 1: Assemble the bracket. (REF. 3,6,7,8)
Do not tighten the four M6*10 screws (REF. 3),
reserve 2-3 mm of gap for step 4.
Step 2:
Install the bracket on the back of the
heater.
Adjust the four sliders which inside the track
to the middle of the heater .Fix the bracket
which you have assembled in the step 1 with
four M6*10 screws (REF. 3), tighten them with
‘L‘ hexagonal wrench (REF. 10).
Step 3:
Fix the part 1 on the wall, tighten the
four nuts (a part of explosive bolt M6*50) with
M6 spanner.