Sonnenkonig 10000601, User Manual

Page: 56 / 62

GB
56
TIMER FUNCTION
•
To set the timer, start with the unit switched off but connected to the power supply.
•
Press the timer button, and the LED display will show . Now press again the timer button
to set the desired time. The setting range is 1-24 hours.
Note. If you have set the unit to switch on/off after 24 hours, press this key again to cancel
the timer.
FAN SPEED FUNCTION
Press the SPEED button to select high, medium or low ventilation speed.
“WATER TANK FULL” ALARM FUNCTION
The internal water tank in the air conditioner has a water level safety switch that controls the
water level. When the water level reaches a predetermined height, the “water tank full” indi-
cator light illuminates. (If the water pump is damaged, please remove the rubber plug at the
bottom of the unit when the tank is full to allow the water to drain.)
CONTINUOUS DRAINAGE
•
If you are planning to leave this unit unused for a long time, please remove the rubber plug
from the drainage hole at the bottom of the unit and connect a drainage hose to the lower
fixing clip. All the water in the water tank will drain.
•
You can drain the water as described above when the unit is set to HEAT mode.
•
If the water pump is damaged, continuous drainage can be used. In this case, the water
pump is not activated. The unit can still be used.
•
If the water pump is damaged, intermittent drainage can also be used. In this case, please
connect a drainage hose to the lower fixing clip when the “Water Tank Full” indicator light
illuminates. This will allow the water in the tank to drain. The unit can still be used.