Sonnen sonnenBatterie 10, Installation Instructions Manual, Page: 27 / 100

Installing the storage system | 5
KD-557 | 1000241 | EN | 02 27 / 100
1. 2.
„
Seal the eight openings on the mounting frame shown in the figure using the dummy
plugs (diameter: 32 mm) from the installation equipment pack.
„
Seal the four openings in the top right section of the mounting frame using suitable
dummy plugs (diameter: 27.8 mm) from the accessories set.
5.2.8 Completing the mounting frame
• The individual components of the housing set must be added to the mounting frame.
• The spacer plate can only be mounted when the battery modules are installed (see Posi-
tioning the battery modules [P. 43]).
4.
4.
2.
3.
1.
5.
„
Mount the floor plate to the mounting frame with three screws and contact discs from
the installation equipment pack (1.).