Installation with sonnenBatterie eco 8.2 | 6
KD-345 | 22041 | EN | X02
17 / 36
6 Installation with sonnenBatterie eco 8.2
DANGER
Electrical work on the storage system
Danger to life due to electrocution!
Switch off the storage system to electrically isolate it.
Disconnect the relevant electrical circuits.
Secure against anyone switching on the device again.
Wait five minutes so the capacitors can discharge.
Check that the device is disconnected from the power supply.
Only authorised electricians are permitted to carry out electrical work.
6.1 Removing the inverter cover
NOTICE
Contact with the components inside the inverter
Damage to components due to electrostatic discharge (ESD)!
Use ESD-compliant equipment.
Do not touch any conductive components inside the inverter.
1
2
Illustration 8: Inverter cover and touch guard in-
side the storage system
Tools:
• Allen screw | 5 mm
• Spanner | 10 mm
Open the storage system.
Remove the touch guard (2) and the
cover (1) for the inverter.
6.2 Installing the mains filter
The components inside the storage system can be arranged differently. This
means that the installation of the main filter may vary.
In the following, select the appropriate case and install the mains filter accordingly.
