Page
14
14
Punttoo User Manual
Click on this button to
open set interval
window (as shown
from left of this screen)
Select new interval to send over to device.
Depends on device models, the range of interval may vary.
Shorter interval tracks more often, but may consumes
more power and shorten battery life.
When fully stopped, device goes to sleep mode and
interval will be automatically switched to a fix time of 1-
hour.
RECEPTION:
For inspecting device signal quality, device receiver
working condition, and battery level change history.
Captured:
Device is put in a good place/position
with good signal quality - location is successfully
captured from satellite. Address and map is
successfully updated on map at the time.
Seeking:
Device is not with good
placement/position, satellite signal can not be
received or signal quality is bad – device has tried
receive from satellite but ended with failure.
Usually caused by improper physical placement,
position or angel, being inside a building, facing
against metal, battery body, magnet, or other
objects that blocks radio signal, or inside metal
enclosure. The way location or address can not
work out.
Change status is in
red.
Only last change
is recorded here
Aging time shown here is calculated
since last
Captured
signal (refer to
explain from right side).
Poll Now function is to
send a query to the device.
Depends on models, some
device do not support it.