8-bit micro-controller
SN8ICE 2K User Manual
SONiX TECHNOLOGY CO., LTD
Page 15
Preliminary V0.1
To continue running the program, click “Debug-> Go” (F5). Program runs and the yellow arrow stops
at the breakpoint.
Figure 4-11 Run to breakpoint
Remove all break points by click “Remove all breakpoints” icon (Ctrl+Shift+F9) then “ Click “Debug->
Go” from the menu or press “F5” to continue program execution. The RUN dialogue indicates the
program status and a “Run…” shows in the status bar.
Figure 4-12 Free Run
Press “F5” to stop the program execution.
