MP5 Plus Writer Easy Guide
SONIX TECHNOLOGY CO., LTD.
Page 37
Version 1.0
5.3 Offline problems and solutions
There are different types of fault information tips for MP5 Plus Writer in offline mode.
SONiX provide solutions for different problems, as shown in table 5-2:
Item
Problems
Solutions
1
Err0
A: Take off MCU ,and repower;
B: Take off MCU, if this prompt is still exist, please contact the agent or SONiX;
2
Err1
Please make sure that the MCU is blank;
3
Err2
A: Please check the connection between MCU and MP5 Plus Writer;
B: Please confirm 20-pin cable not longer than 15cm;
C: Please confirm the socket is in normal status, clean and replace on a regular
basis;
D: The MCU may have open / short problems and so on;
If you still have questions, please contact agent or SONiX;
4
Err3
A: Please confirm the MCU is consistent with the source code ;
B: Please check the connection between MCU and MP5 Plus Writer;
C: Please confirm 20-pin cable not longer than 15cm;
D: Please confirm the socket is in normal status, clean and replace on a regular
basis;
E: The MCU may have open / short problems and so on;
If you still have questions, please contact agent or SONiX;
5
ErrF
Please confirm the source code is consistent with the INI file about Rolling Code;
6
Err5
Placed the other type MCU;
7
Err6
A: Please put the MCU and the corresponding transition board;
B
：
Placed the other type MCU or transition board, Please replace;
C
：
Placed the wrong location or direction;
D
：
The MCU may have Open/Short problems;
8
No response
Plug the USB again
，
download the .SN8/.Hex again
；
9
LEDs Flashed
Plug the USB again
，
download the .SN8/.Hex again
；
Table5-2 Problems and solutions in offline mode
