4
8) DO NOT touch the unit if the machine has fallen into the water during operation.
Remove the power plug from the socket first.
9) DO NOT disassemble the machine if you are not professional.
10) UNPLUG the power source while filling or emptying the tank.
11) DO NOT spray water or liquid over the device and the control panel.
12) DO NOT operate the cleaner without proper grounding.
13) DO NOT place the device on a soft surface where the vents can be blocked.
14) Always turn the heater off after using - leaving it on will damage the internal
components.
15) Use caution when adding or removing items from the cleaning tank as the
splashed fluid is likely to be hot. Any splashed fluid must be dried immediately.
16) In case of emergency or failure to follow the aforementioned items, disconnect the
main supply by removing the plug from the main socket.
APPLICATIONS
The uses for ultrasonic cleaners is almost endless. Provided the product is non-porous
and can normally be immersed in water, they can be thoroughly sonicated. Here are
some examples:
•
Jewelry especially gold, silver & platinum
•
Watchstraps
•
Coins and other collectibles
•
Circuit boards
•
Engine parts
•
Toothbrushes & Dentures
•
Electrical components
•
Make-up brushes and cases
•
Fuel injection nozzles
•
Printer heads and toner cartridges
•
Motorcycle parts
•
Dairy equipment
•
Golf clubs & golf balls
•
Horse bits & stirrups
•
Tattoo equipment
•
Surgical instruments
•
Turbochargers
•
Bicycle parts
•
Knives & bayonets
•
Gun and ammonition
Ultrasonic cleaning is not recommended to be used to clean the following gemstones: