PROGRAMMED PLAY
Programmed play is that tracks on the disc can be edited for playback in a
preferred order with the use of PROG. button.
In MP3 stop mode, press PROG. button once, "PROG" shows in the LCD with a
flickering album "01" and the program sequence indication "P-01"; select the
album number to be programmed using SKIP UP/DN buttons or +10/ALBUM
button, and press PROG. button again to store; the track number "000" flickers
waiting for your selection. Choose the desired track with SKIP UP/DN buttons or
+10 /ALBUM button. Press PROG. button again to confirm the first programming
and advance to the next programming step. The program sequence indication
changes to "P-02" waiting for your next input.
Repeat the steps above to program more tracks. A maximum of 20 tracks can
be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order
after you are done with programming. The player stops automatically after all
programmed tracks are played.
You may press STOP button to terminate programmed playback. In program
stop mode, press STOP button again to clear the programming; press
PLAY/PAUSE button to begin the programmed playback with the programming
order identical with the previous one done.
Press and hold SKIP buttons to initiate high-rate scanning between tracks;
release one of them to begin playback of music at normal speed.
REPEAT MODES
Press MODE button once in play mode to repeat the current track; the LCD
shows the icon for single track repeat.
Press MODE button twice to repeat tracks in the current folder as a whole; the
LCD shows the icon for DIR repeat.
Press MODE button three times in play mode to repeat tracks on stored on this
storage media (USB/MMC card) as a whole; the LCD shows the icon for all
tracks repeat.
INTROSCAN PLAY
Press MODE button for the four times in play mode to activate introscan
playback immediately; the player will pick up tracks for playback of the first 10
seconds of each track in a sequential order after PLAY/PAUSE button is
pressed. You may press PLAY/PAUSE button once again to exit introscan play
mode and return to normal playback from the track it's arrived at.
RANDOM PLAY
Press MODE button for the five times in play to activate random playback
immediately; the player will pick up tracks in a random sequence for playback
after PLAY/PAUSE button is pressed. You may press MODE button once again
to exit random play mode and return to normal playback.
AUXILIARY IN
Your player can be used as a power amplifier to playback the programs from
portable radio, TV set or MP3 player or whatever provided this appliance is so
designed that audio signal may be produced through a LINE-OUT jack or the
like.
Observe the following steps to connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide Function Switch to CD/MP3/AUX position.
3. Connect the appliance into the player's AUX in socket with the supplied LINE
OUT cable of the appliance.
4. Power on the appliance and begin play.
Easy job, right? At this time you will be able to hear the sound produced from
the programs the connected appliance is broadcasting.
EQ SELECTION
Press PROG./EQ button continuously during disc playback mode to select EQ
sound effects among DBB, POP, CLASSIC, JAZZ, ROCK, and NORMAL.
EXTERNAL MEMORY MEDIA OPERATION (USB,MMC/SD)
Prepare the player for external memory media operation
Insert a USB data traveller into the USB port
OR
insert a MMC/SD card into the
card slot; slide the FUNCTION switch to the USB/CARD position and playback
will start from the first track.
NOTES:
1. The player reads data from the SD/MMC card by default if both USB data
traveller and MMC/SD cards are inserted. You may press the USB/CARD
button to switch between these modes in stop mode.
2. Operation for switching between USB and SD/MMC is only in stop mode.
3. In USB playing mode: when a SD/MMC card is inserted into the card slot,
USB playing will stop automatically and the SD/MMC card will start playing
from the first track.
4. In SD/MMC card playing mode: when a USB data traveller is inserted into
the USB port, SD/MMC playback will stop automatically and then restart
from the first track.
VARIOUS PLAY MODES
SKIPPING TRACKS AND SEARCHING BETWEEN TRACKS
Press SKIP UP button once to skip the current track and play the next track,
press this button continuously to go to corresponding tracks ahead;
Press SKIP DOWN button once to skip the current track and go back to the
beginning of this track, press this button continuously to go back to
corresponding tracks at back.
