-
10
-
7. To finish encoding, press STOP button, “REC” will disappear.
8. To divide track, press REC button during recording, recording will stop momentary. Then recording will resume
to work.
9. To hear newly encoded track:
Press FUNCTION button to select USB or SD mode.
During playback from USB or SD, press REC button to switch between tracks recorded by this unit or other
tracks stored in the USB (or SD) originally. Rotate ALBUM UP & DOWN knob, if LCD shows “F000”, it means
the unit has been switched to the folder for storage of tracks recorded by this unit.
“F000” is a designated folder for storage and playback of trucks recorded by this unit.
Press SKIP
or SKIP
button to select the newly recorded track.
Remark
- The recording speed is 1:1 and according to the actual playing time of the external audio device.
- The recording format is preset at – MP3 bit rate : 128 kbps
- Do not take out USB or SD device during recording to USB/SD.
Earphone jack & line out socket
1. This system can be connected with headphone or external amplifier / speaker by 3.5mm EARPHONE JACK.
2. This system can be connected with external device (eg. Amplifier and speaker) by RCA LINE-OUT JACK at
rear cabinet.
Energy saving
If there is no audio signal from Turntable / USB / SD / AUX / Bluetooth for over 10 minutes, the unit will
automatically switch to standby mode for energy saving.
