SONIQ HB413, Instruction Manual, Page: 6 / 8

Remote control
-9-
Remote control
-8-
1
2
4
6
3
7
5
8
STANDBY
Press to switch on the sound base. Press it again to
put the sound base in standby mode. 1.
EQ
Press to switch the equalizer modes among
MUSIC, MOVIE, GAME and NEWS. 2.
Press [] to turn up the volume. 3.
Press to temporarily pause a playback. Press it
again to resume the playback. 4.
Press to return to the previous track;
Press to skip to the next track. 5.
Press [VOLUME-] to turn down the volume. 6.
OPT COAX
LINE AUX
BT
Select LINE IN, AUX IN, OPTICAL IN, COAXIAL or
BLUETOOTH mode. 7.
Press to temporarily switch off the sound. Press it
again to switch it on. 8.
Remote Control Operation
Insert two AAA/1.5V batteries into the remote control. Point the
remote control at the remote sensor on the front panel. The remote
control works within a distance of about 8 metres from the sensor
and within an angle of about 30 degrees from the left and right side.
Battery Installation
Remove the battery compartment cover on the back of the
remote control.
Load the batteries into the battery compartment making sure
that the batteries have been inserted with the correct polarities
matching the s, - as indicated inside the battery
compartment. Load the batteries into the battery compartment
making sure that the batteries have been inserted with the
correct polarities matching the s, - as indicated inside
the battery compartment.
Replace the cover.
Remove the batteries when you do not intend to use the remote
control for a long time.
Do not mix new and used batteries, or different types of
batteries.
Weak batteries can leak and severely damage the remote
control.
Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Be environmentally friendly and dispose of batteries according
to your government regulations.
1.
2.
3.
Note: