-6-
5. Operating Instruction
5.1 Power ON
Connect the power adaptor into the jack on the back of CSA100K
labeled “DC”, and then plug the power adaptor into the wall outlet.
The LCD display turns on. Press to turn on the unit.
5.2 Set Time
Under any mode, press “Time” to set time. Press “+” or “-” on the
backside of the unit to switch the Hour mode between 12-Hour and
24-Hour. Press “Time” to confirm it. Then Hour figure and MINUTE
figure begin to flash. Press “+” or “-” to adjust the HOUR and press
“Time” to confirm it, then press “+” or “-” to adjust the MINUTE and
press “Time” to confirm the setting. It exits the setting in 10seconds if
no operation on any key.
5.3 Set Alarm Time
Under any mode, press to enter alarm time setting,
icon displays
in the LCD. Press some times to display OFF/BU. (OFF- non
alarm is selected). When BU icon appears, press “SET/MODE” to
enter alarm time setting. The HOUR figure begins to flash, then
press “+” or “-” on the top side of the unit to adjust the figure; Press
“SET/MODE”, the MINUTE figure begins to flash. Press “+” or “-” on
the unit to adjust the figure; then press "SET/MODE" to confirm.It will
exit the setting in 5 seconds if no operation on any key.
Operation Guide