iv
Redbox RB-SC2 User Handbook
Safety Information
Safety of Mains Operated Equipment
This equipment has been designed to meet the safety regulations currently advised
in the country of purchase and it conforms to the safety regulations specified by
use of the CE Mark.
Warning : There are no user serviceable parts inside the equipment. If you should ever
need to look inside the unit, always disconnect the mains supply before removing the
equipment covers.
Voltage Setting Checks
The integral power supply is designed to accept a universal input of 85 to 264 VAC mains
input voltage. The safety specification of your RB-SC2 complies with local requirements and
must be earthed through the mains connector.
Fuse Rating
The RB-SC2 is supplied with a single fuse in the live conducting path of the mains power
input. For reasons of safety it is important that the correct rating and type of fuse is
used. Incorrectly rated fuses could present a possible fire hazard, under equipment fault
conditions. The fuse rating for the RB-SC2 is:
230 or 115 V operation - 1A 5 x 20mm SB
The active fuse is fitted on the outside rear panel of the unit.
Power Cable and Connection
An IEC power connector is supplied with the RB-SC2 which has a moulded plug attached
– this is a legal requirement. If no moulded plug has been supplied with your RB-SC2, please
contact your supplier, because an IEC connector is always supplied from the Sonifex factory.
If for any reason, you need to use the RB-SC2 with a different power cable, you should use
the following wiring guidelines.
Wire Colour
Connection
Green, or green and yellow
Earth (E)
Blue, or Black
Neutral (N)
Brown, or Red
Live (L)
Fig B: Power Connections
Connect the equipment in accordance with the connection details and before applying
power to the unit, check that the machine has the correct operating voltage for your mains
power supply.
Important Note : The terminal marked on the rear panel must be earthed.
SAFETY INFORMATION
SAFE
T
Y INFORMA
TION