Redbox RB-DA6, RB-DA6G & RB-DA6P User Handbook
1
INTR
ODUC
TION
INTRODUCTION
1
RB-DA6, RB-DA6G & RB-DA6P 6 Way Stereo Distribution Amplifier
Introduction
Fig 1-1: RB-DA6 Front Panel.
Fig 1-3: RB-DA6G Front Panel.
The RB-DA6, RB-DA6G & RB-DA6P are high performance 6 way stereo analogue distribution
amplifiers for splitting a source to a number of different outputs. The RB-DA6 and RB-DA6P
have 1 stereo input and 6 stereo outputs with gain control on both inputs. They can also
be configured so that 1 mono input can be distributed to 12 outputs. As a variant of the
RB-DA6, the RB-DA6G, has an individual gain control on every output.
On the RB-DA6 and RB-DA6G the XLR-3 inputs and outputs are electronically balanced and
can be wired unbalanced. Each output is individually buffered so that a short circuit on one
won’t affect the others.
The RB-DA6P is a version of the RB-DA6 audio distribution amplifier which uses Neutrik
Phoenix stlye connectors instead of XLR inputs and outputs. Each unit is shipped with
the mating connectors so that wires can be simply terminated using a small flat-blade
screwdriver. The inputs and outputs are electronically balanced and can be wired
unbalanced. Each output is individually buffered so that a short circuit on one won’t affect
the others.
The RB-DA6 and RB-DA6P have master left and right gain controls which are pre- set
potentiometers accessible through the front panel. On the RB-DA6G each channel has
an individual output gain control (normalising) which are all pre-set potentiometers, also
accessible through the front panel. The 1-12 mono, 1-6 stereo switch is recessed on the
front panel to prevent accidental knocking. An LED power indicator on the front panel
displays the power supply connection.
Fig 1-2: RB-DA6P Front Panel.
