23
Webserver 6
Figure 6-6: Password Setting Page
Password Setting
The Password Setting Page allows you to restrict access to
certain pages on the Webserver. Setting Level 1 password
protects access to the Home and Dialler Pages, and if
the level 2 password is not set it will also restrict access
to those pages protected by the level 2 password. Set
the level 2 password to restrict access to all the settings
pages – i.e. Configuration, Password Setting, Network and
Updates. The password requires 5 digits of case-sensitive
alphanumeric characters or should be cleared to remove
the password protection.
The Automatic Log Out Time is between 0 and 30, where
0 is disabled and 1-30 is the inactivity timeout period in
minutes for the Hybrid to automatically log out.
The DHY-04G/HD can store a SIM card Access Code
(or PIN) if you wish to protect the SIM card from being
misused on other equipment. If you load a protected SIM
card then the SIM Enabled LED will flash to indicate a
problem with the SIM and a message will be shown on the
Device Info page. If a SIM requires an access code then the
message displayed will be +CPIN: SIM PIN
Enter the Access Code here and press the submit button
and the PIN will be applied to the SIM card and, assuming
it is correct, network access will be available now and
automatically every time the unit is powered up.
Please note that other passwords or secondary access
codes are not settable here.
