AVN-DIO12 Handbook
6
w w w . s o n i f e x . c o . u k
t:+44 (0)1933 650 700
f:+44 (0)1933 650 726
[email protected]
Technical Specification For AVN-DIO12
Microphone XLR Input Pin-out
Pin
Func�on
1
Chassis Ground
2
Input Phase
3
Input Non Phase
Microphone Input - XLR
Input Impedance:
2.2kΩ balanced
Maximum Input Level:
-68dBu (max gain) to -8dBu (min gain)
Gain:
Adjustable 20dB to 86dB
Frequency Response:
20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
High Pass Filter Response:
Fc = 125Hz @ 6dB per octave
THD+N:
<0.01%, -32dBu input, 40dB gain, 20Hz to
20kHz, 20kHz BW
E.I.N.:
129dBu, 20kHz BW, max gain, Rs=200Ω
Common Mode Rejec�on:
>60dB @ 1kHz
Phantom Power:
+48V ± 4V
Network and AoIP
AoIP Standard:
Dante
Channels:
2 transmit
Flows:
2 transmit
Sample Rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz
Encoding:
PCM 16, PCM 24, PCM 32
AES67 Support:
Yes
Connec�vity:
etherCON (RJ45 compa�ble)
Speed:
100Mbps
Dante Domain Manager
Ready:
Yes
Clock Source:
Internal (PTP Leader) or Network PTP Leader
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
TBD
Max PSE Power Usage
15.4 W
Equipment Type
AVN-DIO12:
Dual Microphone Input to Dante® with Mic
Gain
Physical Specifica�on
Dimensions (Raw):
14.0cm (W) x 13.6cm (D) x 4.2cm (H)
5.5” (W) x 5.4” (D) x 1.7” (H)
Dimensions (Boxed):
17.8cm (W) x 17cm (D) x 5.6cm (H)
7.0” (W) x 6.7” (D) x 2.2” (H)
Weight
Ne�: 0.5kg Gross: 0.7kg
Ne�: 1.1lbs Gross: 1.4lbs
Device View
Open up the Device View by double clicking on the device name in the
rou�ng grid.
Status
Within the
Status
tab, informa�on about the device can be seen, such as
the product type and the current IP address.
Device Configuration
Within the
Device Config
tab the following can be modified.
• Device Name
• Sample Rate
• Encoding
• Clocking
• Device Latency
An op�on is also available to clear the configura�on, rese�ng all se�ngs to
their default values.
Fig 11: Status tab
Fig 12: Device Config tab
