Sonicware LIVEN BASS&BEATS User Manual Download

Page: 35 / 48

Editing bass patch memory parameters

Importing wavetable waveforms

① Use a MIDI cable to connect the MIDI IN with a MIDI

device or another LIVEN Bass&Beats MIDI OUT.

② While pressing

, press

to select WT.IM.

③ Turn the

VALUE

knob to select the destination

for saving the imported wavetable waveforms, and
press

④ Start transmission from the other MIDI device.

• RCV will appear on the display.

⑤ Press

to save.

• SAVE will appear on the display.

• Regardless of data transmission status,

can be

pressed to cancel.

• After transmission completes, DONE will appear on

the display and wavetable waveform selection will be
activated.

• Be aware that overwriting waveforms used in patch

memories will change their sounds.

Exporting wavetable waveforms

① Use a MIDI cable to connect the MIDI OUT with a

MIDI device or another LIVEN Bass&Beats MIDI IN.

② While pressing

, press

to select WT.EX.

③ Turn the

VALUE

knob to select the wavetable

waveform to export.

④ Press

, and start reception on the other MIDI de-

vice.

• Regardless of data transmission status,

can be

pressed to cancel.

• After transmission completes, DONE will appear on

the display and wavetable waveform selection will be
activated.

Summary of Contents for LIVEN BASS&BEATS

















































Search results

Summary of Contents for LIVEN BASS&BEATS

Reviews:

Related manuals for LIVEN BASS&BEATS

Brands by name

Popular brands

Sonicware LIVEN BASS&BEATS, User Manual

Search results

Summary of Contents for LIVEN BASS&BEATS

Reviews:

Related manuals for LIVEN BASS&BEATS

Brands by name

Popular brands