Information Specific to Wireless LAN authorization US and Canada
APL22-070 / TZ 200 Wireless and APL22-080 / TZ 100 Wireless
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
RF Radiation Exposure Statement
This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters (7.9 inches) between the radiator (antenna) and your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Antenna
This device has been designed to operate with an antennas having a maximum gain of 4 dBi. Antennas having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that permitted for successful communication.
North American Authorized Channels
SonicWALL declares that the APL22-070 (FCC ID: QWU-070)
(IC: 4408A-070) and APL22-080 (FCC ID: QWU-080) (IC: 4408A-080) when sold in US or Canada is limited to CH1~CH11 by specified
firmware controlled in the USA.
For more information regarding the above statements, please contact SonicWALL, Inc. at:
1143 Borregas Avenue
Sunnyvale, CA, 94089-1306
1-408-745-9600
WLAN / RLAN
2.4 GHz
Indoor Only
Binnen slechts
D'intérieur Seulement
Innen Nur
Dell'interno Soltanto
Indoor Somen te
De interior Solamente
This equipment may be operated in:
Betrieb dieser Ausrüstung wird innen erlaubt:
L'opération de cet équipement est permise dans:
AT
BE
CY
CZ
DK
EE
FI
FR
DE
HU
IE
IT
LT
LU
NL
NO
PL
PT
SK
ES
CH
GB
BG
GR
LV
MT
RO
SI
SE
Country and channel selection is made in software. Follow user
documentation to make country and channel setting.
Land und Kanalauswahl sind in Software gemacht. Folgen Sie
Verbraucherdokumentation, um Land und Kanal zu machen,
setzend.
La sélection de pays et canal est faite dans le logiciel. Suivez la
documentation d'utilisateur pour faire le pays et la canal sélection.
Summary of Contents for TZ 100 Series
Page 5: ......
