SonicWALL NSA E7500 Getting Started Guide
Page 13
EFT DRAFT
The
X1 DNS1-3
entries will only be displayed if they have been set from the
Configure menu. If their value is still 0.0.0.0 (default value)
,
they will not appear
in the Status List.
Configure
This option allows you to configure specific aspect of the appliance. Once
selected, the LCD will display a PIN request.
Note:
Default PIN is 76642. PIN number can be changed from the
System > Administration page.
All numbers are inputted using the 4 buttons. Select the individual digit field
using the
Left
and
Right
button and select the desired number using the
Up
and
Down
Button. Digits increase incrementally from 0 to 9. Press the
Right
button to confirm your PIN and enter the Configuration Menu.
The appliance will remember the PIN number and allow the user to navigate in
and out of the Configuration Menu. However, once the appliance enters Screen-
Saver Mode, whether from the sixty second time out or from pressing the
Left
button from the Main Menu, the PIN number will be forgotten and will have to be
inputted again to access the Configuration Menu.
Summary of Contents for NSA E7500
