B - The ACO section
PITCH CV out
– A 1V/oct pitch CV out. 25Hz=0V, 6.4kHz=8V
ENV CV out
– An envelope CV output with
a decay factor of 50ms. The ENV CV signal
will always be affected by the ENV AMT knob.
WAVE
– A Mix knob between square wave (fully counter-clockwise) and a
saw wave (fully clockwise).
OCTAVE
– Can shift the oscillator’s sound output from -2 octaves in its
minimum position to +2 octaves at its maximum position. The pitch CV
out will not be affected by these shifts.
HARMONY –
Can shift the semitones by -7 in its minimum position to +5
in its maximum position according to a just intonation scale. Just
intonation scales are slightly different than western scales especially in
certain notes. See table on page 9 to see an exact comparison between
our just intonation scale and the familiar western equal-tempered scale.
OCTAVE CV in –
Patch any CV source here to shift the octave just like the
knob does. The CV value will be mixed with the knob’s position.
HARM CV in –
Patch any CV source here to shift the harmony just like the
HARMONY knob does. The CV will be mixed with the knob’s position.
L:gate R:trig CV out
–
A stereo minijack output which plays gate CV on the
left channel and trigger CV (3.5V 15ms) on the right
channel.
5
