Sonichi S7000-DVD, Owner'S Manual, Page: 31 / 35

0
. Inset mounting collar into the dashboard, and
bend the mounting tabs out with a screwdriver.
Make sure that lock lever is flush with the
mounting collar (not projecting outward).
. Secure the rear of the unit.
After fixing mounting bolt and power connector,
fix the rear of the unit to the car body by rubber
cushion.
. Insert trim plate.
Installation Guide
Installation Procedures
First complete the electrical connections, and then check for
correctness.
Reset
Press button to flip down the panel. Then press the RESET
button with a pointed object to reset the unit to the original status.
Note: Press the
RESET
button will erase the clock and stored
stations.
Installation Opening
This unit can be installed in any dashboard having an opening as
shown below.
The dashboard should be 4.75mm - 5.56mm thick in order to be
able to support the unit.
Lock lever
Important:
Remove these two screws before installation. Otherwise,
the DVD player will not work.
183mm
52mm
Mounting bolt
rubber cushion.