manualshive.com logo in svg

Sonic Cheer Nano BTE, User Manual

Share
Download
Sonic Cheer Nano BTE User Manual Download Page 44

44

SONIC

X-ray, CT, MR, PET Scanning and Electrotherapy

 

·

Remove your hearing aid for example during X-ray, CT / 

MR / PET scanning electrotherapy or surgery as your 

hearing aid may be damaged when exposed to strong 

fields

Avoiding Heat and Chemicals

 

·

Your hearing aid must never be exposed to extreme 

heat e.g., left inside a parked car in the sun

 

·

Your hearing aid must not be dried in microwave ovens 

or other ovens

 

·

The chemicals in cosmetics, hairspray, perfume, after 

shave lotion, suntan lotion and insect repellent can 

damage your hearing aid. Always remove your hearing 

aid before applying such products and allow time to dry 

before putting it on.

Power Instrument

 

·

Special care should be exercised in selecting,  

fitting and using a hearing aid where maximum sound 

pressure capability exceeds 132 dB SPL  

(IEC 60318-4), as there may be risk of impairing the 

remaining hearing of the hearing instrument user

Summary of Contents for Cheer Nano BTE





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands