2
Bypass tactile switch is now moved to the right but has the same functionality. If engaged, red LED will be on. With power off, the
unit will automatically go into hardware bypass and select line 1.
8
Output select switch now affects both channels at once and is a tactile switch with 2 visible LED indicators: green for the output
transformer and yellow for solid state balanced output. The sound in both modes is unchanged.
23
When pressed, the new Attenuation switch reduces the tube drive by 6dB on both channels while compensating the output level by 6dB.
The signal presence/overload LED’s will glow less showing the attenuated signal. The output will sound a bit cleaner but with no loudness
change.
CREAMLINER III
All controls are the same as with Creamliner II, except that the Fat and Air trimpots have been replaced with pots to allow for quicker and more
frequent adjustment:
For the rest of the controls, please see the corresponding legend for Creamliner I.
2
Bypass tactile switch. If engaged, red LED will be on. With power off, the unit will automatically go into hardware bypass and select
line 1.
3
and
4
Pots used to adjust the level of fat and air boost. See
9
and
10
8
Output select switch now affects both channels at once and is a tactile switch with 2 visible LED indicators: green for the output
transformer and yellow for solid state balanced output. The sound in both modes is unchanged. From 2022 on, all Creamliners will have a fully
discrete output in both modes (as opposed to only in OT mode before).
23
When pressed, the Attenuation switch reduces the tube drive by 6dB on both channels while compensating the output level by 6dB. The
signal presence/overload LED’s will glow less showing the attenuated signal. The output will sound a bit cleaner but with no loudness change.
