The Setup Menu
Return to Pg.1
Page 14
General
When you first enter the Setup Menu, the General tab will automatically be highlighted as the first menu group.
1. Press
to select this menu group, which will then highlight
beep vol
in the
bottom row of tabs.
This option controls whether you hear an audible beep when you press
buttons or not. 0 turns off the
Beep
function, while 1-4 adjust the volume
level of the
Beep
function.
2. Press
to activate the
beep vol
screen, which will then display an arrow
next to the marked checkbox.
3. Press
or
to move the arrowto the checkbox option you prefer.
4. Press
to mark the checkbox you’ve selected.
5. Press
to deactivate the
beep vol
screen and to enter the selection you made.
6. Press
to bring up the next bottom tab —
resume
.
This screen allows you to turn the
Resume
function off so that the RioVolt
SP250 will no longer pick up playing the same song at the same position
where it had left off when you powered it off last or when you switched to
the FM Tuner.
ON
maintains the
Resume
function.
OFF
discontinues the
Resume
function.
7. With the
resume
tab highlighted, press
to activate the
Resume
screen.
By default the
ON
checkbox will be checked.
8. Press
to move the arrow to the OFF checkbox if you want to turn off the Resume function.
9. Press
to mark the checkbox you’ve selected.
10. Press
to deactivate the
Resume
screen and to enter your selection.
11. Press
to bring up the next bottom tab —
vol step
.
This screen allows you to select at what rate the
Volume
increases and
decreases. You can decrease the
vol step
to
20
, but the default is set to
40
to allow you to fine tune your
Volume
levels.
12. Press
to activate the
Volume Step
screen, which will then display an
arrow next to the marked checkbox.
13. Press
to move the arrow to the
20
checkbox if you want to lower the
vol step
function.
14. Press
to mark the checkbox you’ve selected.
15. Press
to deactivate the
Volume Step
screen and to enter your selection.
16. Press
to bring up the next bottom tab —
language
.
By default this screen is set to
EU & US
for
English
, but if you prefer you
can select either
Korea
or
Japan
.
17. Press
to activate the
Language
screen, which will then display an arrow
next to the marked checkbox.
18. Press
or
to move the arrow to the the language checkbox you prefer.
19. Press
to mark the checkbox you’ve selected.
20. Press
to deactivate the
Language
screen and to enter your selection.
21. Press
to bring up the next bottom tab —
cd esp
.
CD ESP
stands for
CD Electronic Shock Protection
. ESP adjusts the
amount of music that is stored to prevent skipping when the RioVolt is
jarred. The options are
40
seconds or
160
seconds for music CDs.