RHK900 (SBT625ss) for USA Updated: 16-12-2014
3)
Make sure alarm time is correctly set for AM or PM (1).
Setting Alarm 2
1)
Once alarm AL1 has been set, slide
ALARM SELECTOR SWITCH (5)
to AL2 position. , the alarm
indicator
AL2 (13)
will light up.
2)
Press and hold the
ALARM SET (10)
and the
FAST Button (8)
or the
SLOW button (9)
to advance
the clock display until you reach desired alarm setting.
Selecting 12 or 24 hours format –
Press and hold the
Fast button (8)
for 6 seconds to enter the hour selection mode, release the
Fast button (8)
when the display shows "12 H" or "24 H". Short press the
FAST button (8)
to
toggle between 12 or 24 hours. If no selection is made within 4 seconds, then the last displayed
hour format will be chosen and the display will return to the normal Time mode.
Alarm –
To Enable Alarms:
Slide the
Alarm Mode Switch (4)
to your desired position:-
a) “OFF“ for Alarm off b) “BUZZ“ for sound c) “VIB“ for bed shaker d) “VIB/ BUZZ“ for both
sound and bed shaker
NOTE:
once the wake up mode is chosen, this will apply to both alarms.
To Select Alarm
1)
slide the
ALARM MODE SWITCH (5)
to AL1 position, the alarm indicator
“AL1“ (2)
will light up
to indicate Alarm 1 is activated.
2)
slide the
ALARM MODE SWITCH (5)
to AL2 position, the alarm indicator
“AL2“ (13)
will light up
to indicate Alarm 2 is activated.
3)
slide the
ALARM MODE SWITCH (5)
to AL1+AL2 position, the alarm indicator
“AL1“ (2)
and
“AL2“ (13)
will light up to indicate both Alarm 1 and Alarm 2 are activated.
Alarm Patterns –
When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of sync with the
vibrator. This means that when the buzzer / flashing display is ON, the vibrator will be OFF and while the
buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 -
When Alarm 1 is activate, it will have 3 beeps, then vibrate. This pattern is repeated until the
alarm is stopped.
ALARM 2
-
When Alarm 2 is activate, it will have 4 beeps, then vibrate. This pattern is repeated
until the alarm is stopped.
Adjusting The Alarm Duration Time
The default alarm duration time setting is 30 minutes, you may adjust the alarm duration between
1 minute and 59 minutes as desired. To adjust the alarm duration:
• Press and hold the
AL. SET button (10)
for six seconds. The clock display will show the default
alarm duration as ‘30’, release the AL. SET button.
• Press the
SLOW button (9)
to adjust the alarm duration to the desired setting, from 1 minute to
59 minutes.
• When the display is showing the desired alarm duration time, it will return to the normal clock
mode after 3 seconds. The new alarm duration time setting becomes the new default and
remains in the memory until you change it again.
Shutting Off Alarm –
Alarm can be shut off temporarily for the day or shut off permantently.
1)
When the alarm goes off, simply press the
AL Off button (11)
the alarm will shut itself off
for the day and come back on at the same time the next day if the alarm setting has not
changed.
2)
To shut off the alarm permanently, slide
Alarm Mode Switch (8)
to OFF positon. The alarm
will not come on until
Alarm Mode Switch (8)
is set to other position.
