9
GETTING STARTED
TIME AND ALARM SETTINGS
Setting the Time of Day
1. Press the
Time Set
button. Blinking red dots shown on the
display indicate time set mode has been activated.
2. Press the
Hour
buttons up or down and the
Minute
buttons
up or down to set desired time. The PM indicator is located
on the top left hand side (see diagram next page).
3. Press the
Enter
button when done to complete time setting.
- Display dots will stop blinking to indicate time has been
set.
Setting Alarm Times - there are two alarms AL.1 and AL.2.
Setting Alarm 1
1. Press and hold
AL.1 Set
button. Blinking red dots shown on
the display indicate alarm set mode has been activated.
2. Press the
Hour
buttons up or down and the arrow
Minute
buttons to set desired alarm time.
3. Press the
Enter
button when done to complete, a red LED
light will appear on the display’s left side indicating alarm 1 is
now set (see diagram next page).
Setting Alarm 2
Follow the same steps for AL.1 above to set AL.2. AL.2 will have
its own indicator light also located on the left as A2.
