19
DOORBELL TRANSMITTER SET UP
Continued
Linking Doorbell Transmitter to Main Unit
This procedure will link your doorbell transmitter to your
HomeAware™ Main unit. The Main unit will also provide an alert
to all HomeAware™ remote receivers. When using the Sonic
Alert Bridge unit all original Sonic Alert receivers (SA101, SA201,
BL300, and SB1000) will also alert you. It is best to do the LINK
procedure in the same room as close as possible to the
HomeAware™ Main unit.
To link the doorbell to your HomeAware™ Main unit follow the
steps below.
1. Press
Set Up
button on the Main unit and the word
LINK
will
be shown on the display, press
Enter
.
LINK
will begin
blinking.
2. Press the link button on the bottom of your doorbell unit and
a red blinking dot will start blinking on top of the doorbell.
DONE
will scroll across screen when linked.
