3
BEFORE YOU BEGIN: CLEAR ALL PAIRINGS ON THE HEADSET
1. Place the headset into Pairing Mode by holding down the
RIGHT PTT
and the
POWER
buttons
together, and listen for a voice prompt to announce “Base Station registering.”
2. Release both buttons.
3. Power
OFF
the headset.
a. If the headset has been paired with multiple Base Stations prior, follow these instructions to
clear additional pairings from the headset:
i. Power
ON
the headset.
ii. Press both the
BACK
and
MINUS
buttons at the same time. A voice prompt will
announce “Multi Base Station.”
iii.
Use the
PLUS
button to select the next Base Station position. A voice prompt announces
the next base station, e.g. “Base Station 2.”
iv. Press the
RIGHT PTT
button to save and exit the Advanced Menu.
v. Power
OFF
the headset.
b. Repeat Steps 3-a-i to 3-a-v above to select and clear all remaining pairings on the headset.
c. If you are unable to select the next Base Station as in Step 3-a-iii above, no additional pairings
are present.
BEFORE YOU BEGIN: CLEAR ALL PAIRINGS ON THE BASE
STATION
Follow these steps for each Base Station to which a Headset to Multi-Base Station user(s) will be paired.
1.
Make sure any headsets paired to the Base Station are powered off before you begin.
2.
To clear pairings follow these steps:
a. Power
ON
the Base Station (For a WB505R, connect the power adapter to the Base Station
and plug the adapter into a standard 120V wall outlet.).
b.
When all paired headsets are turned off, any position on the Base Station with an active pairing
to a headset will display a quick flashing yellow LED above the corresponding pairing button. If
you see a steady yellow LED, the headset paired in the position is turned on. Turn the headset
OFF
before proceeding.
c.
Press-and-hold the pairing button until it displays a slow flashing yellow LED.
d. Power
OFF
the Base Station.
e. Power
ON
the Base Station and confirm that no yellow LED is visible above the position
button.
f. The pairing is now cleared. Repeat Steps 2a-2e to clear each additional pairing from the Base
Station.
